LCD Control Center
Setting the Clock
Setting the clock is optional. When the clock
is set, the time will appear on the LCD Control
Center. NOTE: You must set the clock if you
will be using the Auto On/Off Time program-
a. Press the ‘MENU’ Button.
b. The word ‘OFF’ will appear at the top of the
LCD Control Center to indicate that the
clock is not set. The programming options
will appear on the LCD Control Center with
a small arrow pointing to ‘SET CLOCK’. H
(Hour) will appear above the ‘LEFT’ Button
and M (Minute) will appear above the
‘RIGHT’ Button. The ‘H’ and ‘M’ icons and
‘LEFT’ and ‘RIGHT’ Buttons will flash.
c. Press or hold the ‘LEFT’ Button under the
flashing H until you have reached the
appropriate hour. If the hour has passed
12, the indicator switches from AM to PM.
d. Press or hold the ‘RIGHT’ Button under the
flashing M to set the minutes.
e. When you have reached the correct time,
press the menu Button six times to scroll
through the remaining programming
options and exit the programming mode.
f. The correct time should now be displayed
on the LCD Control Center.
Programing On/Off Features
The Brewer provides three modes so that you
can enjoy gourmet coffee, tea or hot cocoa on
your own schedule. By programming your
Brewer to turn on each morning, you will
never have to wait for the Brewer to warm up.
It will take the Brewer approximately 3 1/2
minutes to warm up from room temperate.
1. Leave Brewer ON All the Time
The Brewer can be left on all the time so
that it is always ready to brew a fresh cup
of gourmet coffee, tea or hot cocoa. To
turn the Brewer off at any time, simply
press and release the Power Switch. (Note:
Although the clock remains on, if set, you
can not brew a cup of coffee, tea or hot
cocoa). Press and release the Power
Button again to restore power to the
Brewer. You will have to wait for the water
to heat up before the Brewer is ready to
2. Set the Brewer to Turn Off at a Specified
Period of Time After the Last Brew.
a. Press the MENU Button twice to pro-
gram the AUTO OFF feature. The LCD
Control Center will now display the
programming options with a small arrow
next to ‘SET AUTO OFF’.
b.Press or hold the ‘LEFT’ Button under
the flashing H to advance 1 hour at a
time, up to 9 hours.
CONTROLS & INDICATORS
If power is interrupted to the Brewer follow
the procedure above to reset the time as the clock
will not be visible until the time is set. Brew size and
brew temperature menu settings are remembered
and restored automatically. All other settings will be
restored automatically after clock is set.
b07461_Keurig_CareGuide_spreadsB70 18/5/07 12:04 Page 9