0
Owner's of the Canon Digital Camera Canon PowerShot Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
73
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
Adjusting the Flash Output
Still Images
Movies
Choose from the three flash levels in [ ] mode.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Configure the setting.
● Raise the flash, press the [ ] button and
immediately turn the [ ] dial to choose
the flash level, and then press the [ ]
button.
● Once the setting is complete, [
] is
displayed.
● You can also set the flash level by accessing MENU (
=
27)
and choosing [
] tab > [Flash Settings] > [Flash Output].
● You can set the flash level in [
] or [ ] mode by accessing
MENU (
=
27) and choosing [ ] tab > [Flash Settings] >
[Flash Mode] > [Manual].
● You can also access the [Flash Settings] MENU screen (
=
27)
when the flash is up by pressing the [
] button and immediately
pressing the [
] button.
● After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● Screen brightness may change depending on your specified
shutter speed or aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [
].
● To have the setting you did not configure in step 2 (whether
shutter speed or aperture value) automatically adjusted to obtain
standard exposure, hold the shutter button halfway and press the
[
] button. Note that standard exposure may not be possible with
some settings.
● With shutter speeds of 1.3 seconds or slower, ISO speed is [
]
and cannot be changed.
● [ ]: Manual
● Calculation of standard exposure is based on the specified
metering method (
=
59).
Find Your Products By Category
Please Login
