0

Out of 0 Ratings

Owner's of the Canon Digital Camera Canon PowerShot Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 139
 
56
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
High-Speed Continuous Shooting (High-Speed
Burst)
Still Images
Movies
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed,
see “Continuous Shooting Speed” (
=
136).
1
Choose [ ].
Follow steps 1 – 2 in “Specific Scenes”
(
=
50) and choose [ ].
2
Shoot.
Hold the shutter button all the way down
to shoot continuously.
The resolution is [ ] (2304 x 1728) and cannot be changed.
Focus, image brightness, and color are determined by the first
shot.
Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
As more shots are taken, shooting may slow down.
2
Compose the shot and press the
shutter button halfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the shooting
area and look at the camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
[ ] button.
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
To change the number of shots, press the [
][ ] buttons
after choosing [
] in step 1. [Blink Detection] (
=
45) is only
available for the final shot.
The zoom factor cannot be changed with the [
] button after you
press the shutter button all the way down.