Snow Joe Snow Blower Pro Series 21-Inch Cordless Snow Blower User Manual

0

Out of 0 Ratings

Owner's of the Snow Joe Snow Blower Pro Series 21-Inch Cordless Snow Blower gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
8
Discharge Chute Assembly
1. Lift the chute deector onto the discharge chute until it
locks securely into place.
2. Insert the rubber washers between the chute and the
chute deector on each side (Fig. 5).
3. Install the carriage bolts through the inside of the chute,
and fasten with the deector knobs on each side (Fig. 6)
NOTE: Do not overtighten the knobs.
4. Raise or lower the chute deector by loosening and
tightening the deector knobs to achieve the desired snow
stream height.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
mWARNING! Charge only EcoSharp
®
PRO iBAT40XR
lithium-ion battery packs in compatible EcoSharp
®
iCHRG40
lithium-ion battery chargers. Other types of batteries may
cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
When to Charge the EcoSharp
®
PRO
iBAT40XR Lithium-Ion Battery
NOTE: The EcoSharp
®
PRO iBAT40XR lithium-ion battery
packs do not develop a "memory" when charged after only a
partial discharge. Therefore, it is not necessary to run down the
battery pack before placing it into the charger.
• Use the battery charge indicator lights to determine when to
charge your EcoSharp
®
PRO iBAT40XR lithium-ion battery
pack.
• You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Fig. 5
Rubber washer
Chutedeector
Chute
Fig. 6
Deectorknob
Carriage bolt
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights

   Find Your Products By Category