Panasonic Answering Machine Panasonic Cordless Phone With Answering Machine User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Answering Machine Panasonic Cordless Phone With Answering Machine gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 64
 
Troubleshooting
I
f you still have difficulties after following the instructions in this section, disconnect the base unit’s AC
adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then
insert the batteries into the handset again.
General use
Problem Cause/solution
The handset does not turn on even
a
fter installing charged batteries.
R Place the handset on the charger to turn on the handset.
The unit does not work. R M
ake sure the batteries are installed correctly (page 9).
R Fully charge the batteries (page 10).
R Check the connections (page 8).
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset has not been registered to the base unit.
Register the handset (page 31).
I cannot hear a dial tone. R T
he base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R If you are using a splitter to connect the unit, remove the
splitter and connect the unit to the wall jack directly. If the
unit operates properly, check the splitter.
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone
does not operate properly, contact your service provider/
telephone company.
Programmable settings
Problem Cause/solution
The display is in a language I cannot
r
ead.
R Change the display language (page 14).
I cannot register a handset to a base
u
nit.
R The maximum number of handsets (6) is already registered
to the base unit. Cancel unused handset registrations from
the base unit (page 31).
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R B
attery charge is low. Fully charge the batteries (page 10).
I fully charged the batteries, but
still flashes.
R C
lean the battery ends (
, ) and the charge contacts
w
ith a dry cloth and charge again.
R It is time to replace the batteries (page 9).
46
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG9471(e)_1101_ver101.pdf 46 2012/11/01 9:55:25

   Find Your Products By Category