0

Out of 0 Ratings

Owner's of the Kenwood Car Video System Kenwood MONITOR WITH DVD RECEIVER gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 68
 
ENGLISH 57
CONNECTION/INSTALLATIONCONNECTION/INSTALLATION
R Connecting microphone for Bluetooth
(only for DDX672BH/DDX492/
DDX415BT/DDX392/DDX372BT/
DDX320BT)
Connect the microphone (7) to the MIC terminal.
To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
7
Removing the unit (Only for
DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272)
RRemoving the trim plate
1 Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
4
2 Remove from the upper two catches.
The frame can be removed from the top side in
the same manner.
RRemoving the unit
1 Remove the trim plate. (See the left
column.)
2 Insert the two extraction keys (4), then
pull them as illustrated so that the unit can
be removed.
4
Be careful to avoid injury from the catch pins on
the extraction key.