5.0
Owner's of the Avanti Beverage Dispenser PARTY PUB gave it a score of 5.0 out of 5. Here's how the scores stacked up:
11
CAUTION: allow the beer to rest before piercing the plug so as to avoid beer spray.
Piercing pin:
Prior to installing the piercing pin in the keg, place it under running water so that it is wet at the time of
insertion.
Fit the bit vertically and drive it vigorously into the keg.
Then, secure the dispensing head on the keg, pull the locking latch outwards then release it. A click
should be heard, indicating that the dispensing head is correctly secured on the keg.
IMPORTANT:
Once the keg is pierced, the beer contained must be consumed within 28 days, provided that it
remains refrigerated.
Setting up the keg
• Open the door by pulling the door forward with enough force to release the safety latch.
• Place the keg on the refrigerating stand, making sure that the female plug of the dispensing head
is on the right.
• Connecting the hoses: the male plug of the dispensing head corresponds to the gas inlet. The
female plug corresponds to the beer outlet.
Setting up the gas cartridge
a) 16 gram cartridge (Accessory item, sold separately)
• A 16 gram cartridge can be ordered and will dispense one or more 5L keg.
• Make sure that the pressure gauge valve is shut (to shut the valve, turn it
counterclockwise).
• Attach the pressure gauge to the end piece of the CO
2 adapter, all the way until it is
completely tight.
• Insert the 16 gram CO
2
cartridge in the long part of the adapter.
• Screw the two parts of the adapter together until they are properly tightened and no leaks are
detected.
Find Your Products By Category
Please Login
