0

Out of 0 Ratings

Owner's of the Kenwood Car Satellite TV System Digital Media Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 88
 
ENGLISH
27
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Do the required wiring.
(
28, 29
)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2 Fit the catch pin on the extraction keys into the holes on both
sides of the trim plate, then pull it out.
3 Insert the extraction keys deeply into the slots on each side,
then follow the arrows as shown below.
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
INSTALLATION / CONNECTION
1 Remove the mounting sleeve and
trim plate from the unit.
2 Align the holes in the unit (on both
sides) with the vehicle mounting
bracket and secure the unit with
screws (commercially available).
Use only the specified screws. Using wrong screws
might damage the unit.
Part list for installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
JS_KWD_KMM_BT312U_KN_EN_5.indd 27JS_KWD_KMM_BT312U_KN_EN_5.indd 27 25/9/2014 7:53:45 AM25/9/2014 7:53:45 AM