Operating your French Door Refrigerator
If a power failure occurs, ice cubes may melt then freeze together when the power comes back on,
causing the dispenser to be out of order.
To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or
After you dump the ice from the ice bucket, you should press the
dispenser lever once with the ‘ICE CUBED’ or ‘CRUSHED’ function
ON. The ice maker will make new ice faster after you return the ice
bucket in the refrigerator.
If you use all the ice at once, you must repeat Steps 2 and 3 on the
previous page. However, only wait 8 hours before dispensing the
ﬁrst 4 to 6 ice cubes. This will replenish the ice cubes and ensure
maximum ice production.
Using the ice off Function
When you select the Ice Off mode, remove all ice cubes from the bucket.
If you are not using the ice dispenser, the ice cubes may clump together.
Pull the lock lever forward to remove the bucket. Throw away the ice
cubes or clumped ice. Push the bucket back until you hear a click.
Use only the ice maker provided with the refrigerator. The water supply
to this refrigerator must only be installed/connected by a suitably qualiﬁed person. Connect to a
potable water supply only.
To operate the ice maker properly, water pressure of 138 ~ 862Kpa is required.
If you have a long vacation or business trip and won’t use the water or ice dispensers for a long time:
- Close the water valve. Otherwise, water leakage may occur.
- Remove all food.
- Unplug the refrigerator.
- Wipe excess moisture from inside and leave the doors open. Otherwise, odor and mold may
Do not put your ﬁngers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
Never put your ﬁnger or any other objects in the dispenser opening.
- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water while it is in the refrigerator. Remove it to clean it.
All water provided to the refrigerator ﬂows through the core ﬁlter which is an alkaline water ﬁlter. In the
ﬁltering process, the pressure of the water that has ﬂowed out of the ﬁlter is increased, and the water
becomes saturated with oxygen and nitrogen When this water ﬂows out into the air, the pressure
plummets and the oxygen and nitrogen get supersaturated, which results in gas bubbles. The water
may temporarily look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will
Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out
the lever dispenser after dispensing ice or water. It comes back automatically. Ice is made in cubes.
When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.