0

Out of 0 Ratings

Owner's of the Kenwood GPS Receiver DNX572BH gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 60
 
6 ñ English
First Step
Various setup screens appear automatically before
using.
ÑInitial setup
When you rst turn on the unit, the screen of the
conguration setting will appear.
1 Turn the ignition key of your car to ACC.
The unit is turned on.
Initial SETUP screen appears.
2 Touch the corresponding key and set the
value.
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline
unit are set.
Language
Select the language used for the control screen
and setting items. Default is “American English (en)”.
(Instruction Manual P.95)
After setting, touch [Enter].
Angle
DNX8
DNX7
Adjust the position of the monitor. Default is “0”.
(Instruction Manual P.98)
After setting, touch [6].
Color
Set the screen and button illumination color. You
can select whether to perform color scan and adjust
scanning color. (Instruction Manual P.99)
After setting, touch [6].
EXT SW (DNX892, DNX7150BT only)
Control the external devices. (Instruction Manual
P.96)
After setting, touch [6].
Camera
Set the parameters for the camera. (Instruction
Manual P.102)
After setting, touch [6].
OEM SETUP (North America Sales area only)
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
DEMO
Set the demonstration mode. Default is “ON”.
3 Touch [Finish].
NOTE
• “Initial setup”also appears when the unit is reset.