Bissell Vacuum Cleaner Ready Clean User Manual

4.0

Out of 2 Ratings

Owner's of the Bissell Vacuum Cleaner Ready Clean gave it a score of 4.0 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.0 out of 5

  • Maintenance

    4.0 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    4.0 out of 5
of 12
 
Your deep cleaner assembles quickly and
easily. The only tool you will need for
assembly is a Phillips head screwdriver.
1. Locate the screw pack, which is taped
to the upper handle.
2. Slide the upper body onto the lower
body, taking care not to leave a gap
between the upper and lower body.
3. Firmly holding the upper body, screw the
2 screws into the holes marked with arrows.
TIP: If you are having difficulty tightening the
screws, remove, re-insert, and tighten again.
4.
After tightening the screws, ensure proper fit
between the upper and lower body by trying
to separate the two. If assembled properly,
there should be no gap. If a gap appears
between the two (see picture at right), continue
to tighten the screws until no gap is present.
5. Slide upper handle into upper body by
aligning the pin and sliding into place.
NOTE: Be sure to secure upper
handle before lifting. Rotate handle
lock clockwise to secure.
6. Place solution tank on back of unit.
7. Wrap power cord.
Assembly is now complete.
Before you clean
1. Move furniture to another area if
cleaning an entire room. (Optional)
2. Vacuum carpet thoroughly.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
4. Pre-Treating (optional) Pre-treat stub-
born stains and highly soiled carpet in
hallways and other high-traffic areas.
4a. Generously spray BISSELL Tough Stain
Pretreat evenly over soiled area.
Caution: DO NOT OVERWET CARPET
4b. Wait 3-5 minutes before deep cleaning.
Fill the tank
1. Remove the solution tank by lifting it straight
up, then away from the lower body.
2. Unscrew the black cap at the bottom
of the solution tank.
www.bissell.com 800.237.7691
Assembly
5
2.
5. 6.
3.
Operations
WARNING:
To reduce the risk of fire, use only
BISSELL advanced deep cleaning
formula for full size machines
in your deep cleaner. Use of cleaning
formulas that contain lemon or pine
oil may damage this appliance and
void the warranty. Chemical spot
cleaners or solvent-based soil
removers should not be used. These
products may react with the plastic
materials used in your deep cleaner
causing cracking or pitting.
2.
1.
pin
CORRECTINCORRECT
4.

   Find Your Products By Category