Alpine Car Stereo System CDE-124SXM User Manual

4.5

Out of 6 Ratings

Owner's of the Alpine Car Stereo System CDE-124SXM gave it a score of 4.5 out of 5. Here's how the scores stacked up:

  • Reliability

    4.67 out of 5

  • Durability

    4.5 out of 5

  • Maintenance

    4.67 out of 5

  • Performance

    4.17 out of 5

  • Ease of Use

    4.5 out of 5
of 44
 
20-EN
Note
• When the PORTABLE is set, PMD is displayed on the unit.
OFF:
When set to OFF, AUX REAR source cannot be selected.
Setting the AUX SETUP Mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
Setting item: AUX SETUP
Setting contents:
ON (Initial setting) / OFF
ON
*
:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
* You can change the AUX NAME display when AUX SETUP is
set to ON. Press ENTER when AUX SETUP is set to ON,
and select AUX NAME by turning the Rotary encoder, then
press ENTER. After that, turn the Rotary encoder to
select the desired AUX NAME.
Note
• When the PORTABLE is set, PMD is displayed on the unit.
OFF:
When set to OFF, AUX source cannot be selected.
Setting the AUX Level (AUX GAIN)
After setting to ON in “Setting the AUX SETUP Mode”, this setting can
be carried out.
Setting item: AUX GAIN
Setting contents:
LOW (Initial setting) / HIGH
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
Setting the AUX REAR Level (AUX-R GAIN)
(CDE-123 only)
After setting to ON in “Setting the AUX REAR Setup Mode”, this setting
can be carried out.
Setting item: AUX-R GAIN
Setting contents:
LOW / HIGH (Initial setting)
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
Setting item: POWER IC
Setting contents:
ON (Initial setting) / OFF
ON:
The speakers are driven by the built-in amplifier.
OFF:
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and cannot drive speakers.
ON:
OFF:
CDE-123:
CDE-124SXM/CDE-122:
Note
• No sound is produced by the system when the power output is set to
OFF.
Demonstration
This unit has a demonstration feature for the display.
Setting item: DEMO
Setting contents:
DEMO ON / DEMO OFF (Initial setting)
Note
• To quit Demo mode, set to DEMO OFF.
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
Front
left
Amplier
Front
right
Rear
left
Amplier
Rear
right
Front
left
Amplier
Front
right

   Find Your Products By Category